همین حالا تماس بگیرید و برای همکاری و ثبت سفارش اقدام کنید.
Choosing the right bolt and nut is one of the most important steps to ensure the safety of industrial connections and engineering structures. Many connection problems are caused by the wrong choice of dimensions, material, thread or resistance class of parts. DIN, ISO, and ASTM standards have been compiled to determine the technical specifications, manufacturing quality, and usability of these parts. Knowing these standards makes it easier to buy suitable equipment and avoid additional repair costs.
What is the standard table of bolts and nuts and how to make the right choice?
The standard table of bolts and nuts shows the dimensional and technical specifications of all types of connections in a classified manner. Using this information, it is possible to choose the appropriate screw type, diameter, length, thread pitch and mechanical resistance.
Standards specify what features each piece should have. These features include the following:
- Nominal diameter and screw length
- Thread type and pitch
- Shape and dimensions of the bolt
- Height and width of the nut wrench
- Type and composition of raw materials
- Mechanical resistance class
- Type of protective coating and corrosion resistance
- Manufacturing and quality control tolerances
The important point is that the dimensional standard does not necessarily determine the mechanical strength of the part. For the correct selection, the dimensions standard and mechanical properties standard should be checked at the same time.
Introduction of DIN, ISO and ASTM standards for bolts and nuts
The three families of DIN, ISO and ASTM are the most important technical references for identifying industrial bolts and nuts. Each of them provides different specifications about the dimensions, materials, resistance and conditions of use of the parts.
What are the specifications of DIN standard bolts and nuts?
DIN stands for German Standardization Institute and is widely used in various industries to identify connections. Many DIN codes are still used in industrial drawings, technical orders and equipment markets.
The most important widely used DIN standards are:
- DIN 933: Full thread hex bolt
- DIN 931: Half thread hex bolt
- DIN 934: Hex nut
- DIN 912: Cylindrical head Allen screw
- DIN 985: Lock nut with nylon ring
- DIN 125: Flat washer
- DIN 127: Spring washer
Note that replacing DIN standards with ISO does not always mean that all dimensions are the same. When purchasing, the exact specifications of the technical drawing must be matched with the part standard.
What is the purpose of the ISO standard for bolts and nuts?
ISO is an international standardization organization that defines the technical specifications of components for various applications. These standards help coordinate producers and consumers in international markets.
The table below introduces some of the important ISO standards:
Standard code | Part type | Application |
|---|---|---|
ISO 4014 | Half thread hex bolt | General connections |
ISO 4017 | Full thread hex bolt | Threaded connections |
ISO 4032 | Hex nut | Connection with Screw |
ISO 4762 | Cylindrical head Allen screw | Industrial connections |
ISO 7089 | Flat washer | Connection pressure distribution |
ISO 10511 | Nut Locking | Preventing the connection from opening |
For example, ISO 4014 covers the specification of steel and steel hex bolts within defined dimensional ranges. The ISO 4014:2022 version is developed for screws with coarse metric threads from M1.6 to M64.
What is the difference between ASTM standard and DIN and ISO?
ASTM focuses more on material specifications, mechanical properties, tests and technical requirements of products. These standards are important in construction projects, oil and gas industries, petrochemicals and metal structures.
Some well-known ASTM standards are:
- ASTM A307: Carbon steel screws and stud bolts with specified strength
- ASTM F3125: Specification for high-strength structural steel screws
- ASTM A193: Alloy and stainless steel screws and stud bolts for specified temperature and pressure conditions
- ASTM A194: Carbon and alloy steel nuts for pressure and temperature applications
In choosing these parts, it is very important to match the screw standard with the nut standard. Use of incompatible parts may affect connection performance.
Metric bolt size chart and thread pitch specifications
Metric screw size is indicated by the letter M and the nominal diameter number in millimeters. The pitch of the thread also shows the axial distance between two consecutive peaks of the thread.
The table below shows the common and coarse thread pitch of metric screws:
سایز پیچ | گام رزوه درشت (میلیمتر) |
|---|---|
M4 | 0.70 |
M5 | 0.80 |
M6 | 1.00 |
M8 | 1.25 |
M10 | 1.50 |
M12 | 1.75 |
M14 | 2.00 |
M16 | 2.00 |
M18 | 2.50 |
M20 | 2.50 |
M22 | 2.50 |
M24 | 3.00 |
Technical note: These numbers are for coarse metric threads and fine threads have different pitches. For accurate ordering, the diameter, pitch, length and tolerance of the thread must be specified at the same time.
Bolt and nut resistance class table; Which grade is more suitable?
The bolt strength class provides important information about the tensile strength and nominal yield stress of the part. Choosing the right grade should be done based on loading, environmental conditions and connection engineering design.
In steel screws, marks like 8.8, 10.9 and 12.9 are seen on the screw head. These numbers specify the classification of mechanical properties of carbon and alloy steel screws according to the ISO 898-1 standard.
Resistance class | Nominal tensile strength (MPa) | Nominal yield stress (MPa) |
|---|---|---|
4.6 | 400 | 240 |
5.8 | 500 | 400 |
8.8 | 800 | 640 |
10.9 | 1000 | 900 |
12.9 | 1200 | 1080 |
The numbers in the table are used for the initial recognition of the resistance classes and do not replace the minimum standard values. In the final design, the standard version, nominal diameter, production conditions and test certificate should be checked.
Technical experience in choosing bolts and nuts; What mistakes are costly?
An important part of industrial connection problems comes from neglecting the difference in standards and mechanical specifications. A careful examination of the plan, the material of the part and the installation conditions reduces the possibility of making a wrong choice.
In the technical evaluation of bolt and nut orders, a few repetitive mistakes are of particular importance:
- Selecting a screw based solely on diameter and length, without checking the resistance class.
- Replacing DIN with ISO without checking the difference in dimensions and tolerances.
- Using ordinary steel screws in corrosive and wet environments.
- Choosing a nut inconsistent with the resistance class of the screw.
- Ignoring the type of coating and the possibility of galvanic corrosion.
- Ordering fine thread instead of coarse thread. Or vice versa.
For example, steel and steel screws may have similar dimensions; But they show different mechanical properties and corrosion behavior. Therefore, the similar appearance of the parts should not be the main criterion for their selection.
[Suggested external link: ISO official website, ISO 898-1 standard and requirements for mechanical properties of steel screws]
Guide to buying standard bolts and nuts; What should we check before ordering?
The basic purchase of bolts and nuts begins with the precise identification of the technical needs of the project. Recording the complete specifications of the part reduces the possibility of order discrepancies and replacement costs.
For safe selection and ordering, follow the steps below:
- Determine the type of connection: Specify whether you need a screw, nut, washer or stud bolt.
- Standard check: Extract the DIN, ISO or ASTM code from the technical drawing.
- Determine the dimensions: Specify the diameter, length, thread pitch and size of the screwdriver.
- Select the material: Carbon steel, alloy steel or steel according to Select environment.
- Strength check: Determine mechanical class based on calculations and loading conditions.
- Coating control: Check galvanized, black oxide, or other approved coatings.
- Receive documentation: Request material certification and test results appropriate to project sensitivity.
For internal linking, it is recommended to use the following anchor texts:
- [Purchase types of industrial bolts and nuts]
- [Price of steel and steel bolts and nuts]
- [Technical specifications of Allen and hexagon bolts]
Frequently asked questions about the standard table of bolts and nuts
Knowing the difference between standards makes it easier to choose the right parts and avoid ordering mistakes. The answers to the following questions will clear the most important doubts of buyers and technical experts.
What is the difference between DIN 933 and DIN 931?
DIN 933 refers to all-thread hexagon screws and DIN 931 refers to half-thread hexagon screws. The main difference between these two standards is the length of the threaded part of the screw.
Are DIN and ISO standards exactly the same?
No, some DIN standards have been replaced by ISO standards; But all their dimensions are not necessarily the same. Before replacement, the dimensions, tolerance and technical specifications of the parts should be compared.
Is the 8.8 screw stronger or the 10.9 screw?
The 10.9 bolt has a higher nominal tensile strength and yield stress than the 8.8 bolt. The final choice should be made according to the connection design and loading conditions.
What kind of bolts and nuts are suitable for wet environment?
Stainless steel bolts and nuts can be a suitable choice for corrosion conditions. Grades A2 and A4 have different applications and their selection should be done based on the environment.
summary; Choosing the right standard, guaranteeing the quality of the connection
Knowing the standard table of bolts and nuts is one of the important bases for selecting industrial equipment and implementing safe connections. DIN, ISO, and ASTM standards each provide specific information about dimensions, raw materials, and performance of parts.
The technical suggestion is that when buying, don't just pay attention to the name or appearance of the screw. Also check the dimensional standard, resistance class, material, coating and nut compatibility.
If you are confused to choose the right bolt and nut for your project, refer to the technical specifications and connection diagram. This approach enables more accurate decision-making and better management of equipment supply costs.




